Hello,
I need to sanitize a well that is 587' deep with the static level at 210. How many 8 oz. kits or how many ounces of pellets and granules should I use to sanitize the well?
Thanks,
Barbara S.
Thursday, February 27, 2014
Wednesday, February 5, 2014
Just Bought a House with Very High Iron Levels
Hello,
My water analysis results are as follows:
pH: 5.5
Iron: 4.2 ppm
Manganese: 0 ppm
Hardness: 3 grains per gallon
TDS: 230 ppm
Tannin: 0 ppm
I
just bought this house and the iron level is very high, I think the well has iron bacteria in it. There
is orange goo inside the pipe and toilet tank, and the holding tank and hot
water tank are very rusty for their ages. The sediment may come from them. My
goal is to remove or reduce the iron level in the water to reduce staining and
improve drinkability of that water. The well was made in 1994 and has an inside
subpump, and I have very little room for a treatment system
(9" x 16" x 72").
Thanks,
Jason D.
Subscribe to:
Posts (Atom)